There are 9 LEDs in the front of PC Intelligent Controller Model: B . Left 8 LEDs are used to indicate each electronic equipments’ real time state of ON/OFF . The ninth LED is indicate the control mode, if the LED light, the controller is working in Auto mode. These LEDs indication is convenient for offline operation . The LCD display in the right is to display current time and system temperature detected. All the functions is used by not only online with PC , but also offline.

Back of controller : wire socket , communication interface , power supply socket and switch.

Wire socket : connected with 8 electronic equipments . Every equipments has three point : common , opened , closed . User can according to the situation of self to connect with these points.

Communication interface : use RS232 or USB cable . (we supply the special USB cable)

Power supply socket: 12V DC power supply.

How to setup the hardware : connected all the wire-àuse RS232 cable or USB cable connected with PC -à plug into power supply -à Turn ON the switch. .

Notice:
    every electronic equipment’s MAX current is 10A, if you want to increase the load’s current , you can connect a new relay that larger current.

use USB cable to connected with PC ：


USB special cable

USB cable connected with controller

correlative Links:

1. System introduce 2.How to use hardware 3. How to use software 4.Control demonstration 5.How to expand